Ilo Enablement Option; Installing The Ilo Enablement Option - HPE ProLiant MicroServer Gen10 Plus User Manual

The backup system consists of two components:
• RDX cartridge
• RDX docking station
Hewlett Packard Enterprise recommends that no more than one HPE RDX Removable Disk Backup System be connected
to a system at a time.
For more information on installing and configuring the external HPE RDX Removable Disk Backup System, see the Storage
section of the Hewlett Packard Enterprise Information Library:
https://www.hpe.com/info/storage/docs

iLO enablement option

The server base configuration only supports in-band communication for accessing iLO. The iLO enablement option comes
preinstalled with an iLO Essentials license. The remote iLO access feature is activated after the iLO enablement module is
installed.

Installing the iLO enablement option

Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
1. Power down the server.
2. Disconnect the power cord from the AC source.
3.
Remove the power adapter cord from the power cord clip, and then disconnect the power adapter from the server.
4.
Disconnect all peripheral cables from the server.
5. If installed, unlock and remove the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
6.
If the server is in a vertical orientation, position the server in a horizontal orientation.
54
Hardware options installation