Memory Options - HPE ProLiant MicroServer Gen10 Plus User Manual

12. Slide the drive converter tray into the bay until it clicks into place.
13. Install the front bezel.
14. If removed, install the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
15. Connect all peripheral cables to the server.
16. Connect the power adapter to the server, and then secure the power adapter cord in the power cord clip.
17. Connect the power cord to the AC source.
18. Power up the server.
19. Determine the status of the server drives.
The installation is complete.
To configure arrays, see the HPE Smart Array SR Gen10 Configuration Guide at the Hewlett Packard Enterprise
website.

Memory options

The server has two DIMM slots supporting standard PC4-2666V UDIMM for a maximum memory capacity of 32 GB.
42
Hardware options installation