Installing The Chassis Cover; Removing The System Board Assembly - HPE ProLiant MicroServer Gen10 Plus User Manual

Installing the chassis cover

Procedure
1. Install the chassis cover:
a. Insert the cover tabs to their chassis openings. Make sure that the cover is flushed against the top of the chassis.
b. Slide the chassis cover towards the front panel (callout 1), and then install the chassis thumbscrews (callout 2).
2. If removed, install the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
3. Connect all peripheral cables to the server.
4. Connect the power adapter to the server, and then secure the power adapter cord in the power cord clip.
5. Connect the power cord to the AC source.
6. Power up the server.

Removing the system board assembly

To access most internal components, remove the system board assembly.
20
Operations