Install The Center Rack Control - Raven AutoBoom Installation Manual

Chapter 4
Connect the Open Center Valve connection on the AutoBoom harness cable to the single weatherpack
22.
connection of the installed boom sense adapter cable.

Install the Center Rack Control

Directional Valve Boom Sense Adapter Cables Installed
FIGURE 15.
Locate the machine's directional valve.
1.
Disconnect the machine's directional valve connector from the directional valve.
2.
Install the center rack control boom sense adapter cable (P/N 115-0230-039) on the machine's directional
3.
valve connector.
Connect the Center Solenoid Down Sense connections on the AutoBoom harness cable (P/N 115-0230-045
4.
or 115-0230-085) to the single weatherpack connections on the center rack control boom sense adapter
cable.
Center Rack Control Coil Connection
FIGURE 16.
Locate the machine's center rack coil.
5.
Disconnect the machine's connections from the center rack coil.
6.
Install the center rack control boom sense adapter cable (P/N 115-0230-039) on the machine's center rack
7.
control coil.
Connect the machine's connections to the installed center rack control boom sense adapter cable.
8.
44 Bestway 2009 & Newer AutoBoom Installation Manual