Mount The Center Sensor; Center Rack Installation For Large Tree; Sensor Assembly - Raven AutoBoom XRT Installation Manual

MOUNT THE CENTER SENSOR

1. Mount the center sensor assembly to the middle of the center rack using 1-9/16" W x 2-1/2" L x 3/8" thread U-
bolts and 3/8"-16 flanged lock nuts.
FIGURE 4. Center Sensor Installed

CENTER RACK INSTALLATION FOR LARGE TREE

SENSOR ASSEMBLY

1. Insert the tilt sensor arm through the sensor support block.
FIGURE 5. Tilt Sensor Assembly
P/N 016-0237-001 Rev. A
Sensor Between Tubes
Tilt
Sensor
Arm
Sensor
Support
Block
Retaining
Ring
Retaining
Ring
Set Screw
Sensor
Magnet
Sensor
SENSOR INSTALLATION
21