Mount The Center Rack Sensor - Raven AutoBoom Installation Manual

Chapter 4
Boom Sensors Installed
FIGURE 2.
Single Sensor Mounting Location
Secure the left sensor (P/N 063-0130-014) to the front of the left boom (near the breakaway) using two 1-9/
1.
16" W x 2-1/2" L x 3/8" thread U-bolts (P/N 107-0171-611) and four 3/8"-16 zinc flanged lock nuts (P/N 312-
1001-164).
tighten the nuts to ensure the sensor is mounted securely.
2.
Repeat the steps above to mount the remaining boom sensor(s).
3.

Mount the Center Rack Sensor

Center Sensor Mounted to Weldment
FIGURE 3.
Secure the center sensor (P/N 063-0130-018) to the ultrasonic sensor boom mount weldment (P/N 116-
1.
0159-684) using four 3/8"-16 UNC x 1-1/4" hex bolts (P/N 311-0054-106) and four 3/8"-16 zinc flanged lock
nuts (P/N 312-1001-164).
18 Metalfor 2200, 2500, and 3000 Series AutoBoom™ Installation Manual
Dual Sensor Mounting Locations (Optional)