Download Print this page

IBM 74Y4064 Handbook page 189

Managing pcie adapters for ibm power system l922 9008-22l; ibm power system s922 9009-22a; ibm power system h922 9223-22h; ibm power system s914 9009-41a; ibm power system s924 9009-42a; ibm power system h924 9223-42h; ibm emx0 pcie gen3 i/o expansion dra
Hide thumbs


v The adapter supports TCP checksum offload transmission control protocol (TCP), user datagram
protocol (UDP), TCP segmentation Offload (TSO) for IPv4 and IPv6.
v Supports TCP segmentation or large send offload
v Supports EEPROM-SPI and single EEPROM
v Compliant with European Union Directive 2002/95/EC on the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment
Figure 78. PCIe2 LP 4-port (10 Gb + 1 GbE) Copper SFP+RJ45 Adapter
Note: The ports are numbered from top to bottom as T1, T2, and so on for the AIX
operating systems.
Adapter FRU number
00E2715 (Designed to comply with RoHS requirement)
Low-profile tailstock part number: 00E2720
Wrap plug FRU number
74Y7010 (Twinax wrap plug)
10N7405 (1 Gb UTP wrap plug)
Note: Wrap plugs are not included with the card and cannot be purchased from IBM.
I/O bus architecture
PCIe2 x8
Slot requirement
For more information about slot priorities, maximums, and placement rules, see PCIe adapter
placement rules and slot priorities (
p9eab/p9eab_mtm_pciplacement.htm) and select the system that you are working on.
and IBM
Managing PCIe adapters



  Also See for IBM 74Y4064

  Related Manuals for IBM 74Y4064