Symantec NetBackup 5220 Hardware Installation Manual page 29

Identifier
0, 1, 2, 3, 4, 5, 6, 7
Descriptions
Warning identifier against inserting and
removing system disks
You should not insert or remove system disks
without following proper procedures.
Power warning identifier
You must shut off all power sources when
powering off a device.
Identifier for reading the manual
You must read the manual before operating
the device.
Identifier for opening the chassis cover
Provides the procedure for opening the
chassis cover;
1.Unfasten the screw.
2.Press the button on the chassis and then
remove the cover.
Drive identifier
Indicates the ID number of the slot where the
disk resides.
Chapter 3 29
Safety
Identifier conventions