19-Inch Module For 37-Pin System Connector; Structure And Function; Commissioning - Festo EduTrainer Manual

10 19-inch module for 37-pin system connector

10.1 Structure and function

The 19-inch module for 37-pin system connector extends the functional scope of your EduTrainer
system. It enables the connection of 32 digital inputs via a 37-pin Sub-D plug as well as 32 digital outputs
via a 37-pin Sub-D socket.

10.2 Commissioning

1. Connect the inputs/outputs to the PLC using a flat cable:
– SV7/SV5/SV6/SV8: Siemens S7 (16-pin)
– SV14/SV13/SV12/SV11: Other controller types (10-pin)
2. If using modules in parallel, these can be connected via the free insulation-displacement connector
SV7/SV5/ SV6/SV8 or SV14/SV13/SV12/SV11 using flat cables.
3. Connect the 24 V power supply by means of the 3-pin connector SL1 or SL2.
4. The jumpers JP1, JP2, JP3 and JP4 define whether the PLC module is supplied directly via 24 V or via
24 V NA. 24 V NA is switched off in the event of an EMERGENCY-STOP.
5. Screw the 19-inch module into the frame.
© Festo Didactic GmbH & Co. KG 739319
®
PLC
65