Table of Contents
Advertisement
11
MAINTENANCE
For external cleaning, a humid cloth can be used, and if necessary with a little neutral soap.
Solvents or other aggressive liquids which could damage the housing material should not be
used.
11.1
Fuse
In the event that the fuse blows, this should be replaced with a slow blow "T" fuse, size Ø5
x 20 mm and value 250 mA. See image on point 11.2.
11.2
SD card
The SD card is located at the back of the converter.
To get access, unscrew the back cover.
Fuse
Before removing the SD card, it is recommended that it is disconnected. To do this, go to
datalogger menu and select off (see page 32).
To remove the card press on it.
Once removed, copy the file into another device.
Place again the card into the adapter.
Specifically the data that are stored in one writing are the following:
Date
-
Time
-
Average flow rate
-
Flow rate units
-
Total volume
-
Totalizer units
-
State of digital output 1
-
State of digital output 2
-
Status
-
The resulting file has CSV format, which can be viewed directly with a spreadsheet.
36
SD card
Advertisement
Table of Contents
