Table of Contents
Advertisement
8
SERIAL NUMBER
In this section the converter serial number is shown.
9
DEFAULT SCREEN
When exiting the menu, the display shows the default screen. To scroll between the three
operating screens, press the key (2) or (8).
If the device detects no signal at the transducers, because the attenuation is very high, or due
to a bad connection or broken cable, the operating display appears as an informative screen
indicating this situation
10
MAINTENANCE
No special maintenance is required .
For cleaning, a humid cloth can be used, and if necessary with a little neutral soap. Solvents
or other aggressive liquids which could damage the housing material should not be used.
10.1
Fuse
In the event that the fuse blows, this should be replaced with a slow blow "T" fuse, size Ø5
x 20 mm and value 250 mA.
.
35
Advertisement
Table of Contents
