7.8.5
Timeout
It is the minimum time between frames. Default value is 20 ms. In this screen a different
value can be programmed.
Once the previous steps are done, a communication with a master can be established.
Detailed information on the protocol can be found in the R-IT-MBC1COM instructions manual,
that can be downloaded from Tecfluid S.A. website.
8
SERIAL NUMBER
In this section the converter serial number is shown.
9
FIRMWARE VERSION
From the main menu, if "Firmware version" is selected, the screen will show this data and the
corresponding date.
10
WORKING SCREEN
When exiting the menu, the display shows the default screen. The upper part of this screen
shows the following data.
Time
BAT: Battery powered
EPS: External power supply
- - : SD card disabled
SD : SD card connected
SD intermittent : Write error in
SD card
34
- - - : USB not connected
USB: USB connected