12.4
Access to "Installation"
To enter to "Installation" window, press the corresponding tab.
Changing the parameters of this window, the functions of the equipment that affect the
measurement can be programmed.
Once the changes have been made, press the "Send" button to save all data into the device
memory.
The message "Saving program" will appear for two seconds on the converter screen. The
installation data will be stored in the memory of the converter. The date and time will be
synchronized with those of the computer.
From the "Installation" screen the value of the totalizer can also be changed, and reset it to
zero. The value change of the totalizer is made by a particular "Send" button for this function.
12.5
Access to "Programming"
43