7.6
Datalogger
The converter has an SD card module to store the progress of the different variables of the
equipment.
The time interval between writes on the card can be programmed.
The flow rate recorded on the SD card is the filtered flow value.
For more details about the SD card, see point 11.2 on page 36.
7.7
Default screen
Flow rate, totalizer or flow rate and totalizer screens can be programmed as a default. Thus,
the converter presents this screen when a power failure occurs or when returning from the
Installation or Programming menu.
7.8
Modbus (only with external power supply)
It allows to configure the necessary parameters to establish a Modbus RTU communication
with the instrument.
The following menu will appear.
32