Table of Contents
Advertisement
6.2
Converter factor
The electronic converter factor is shown. It should coincide with the Fe parameter on the
converter label.
6.3
Nominal diameter
The value of the nominal diameter is always the internal diameter of the sensor.
6.4
Diagnosis
It allows to test the digital outputs.
Pressing the key (Enter) when Digital 1 or Digital 2 are selected, this output will be activated
or deactivated. When the output is activated, the text is shown as inverse.
6.5
Reset totalizer
This screen allows to return the totalizer to zero.
24
Advertisement
Table of Contents
