6.6
Date and time
This screen allows to set the date and time. This data is necessary for the registration of
values in the SD card (datalogger).
To set the date, the format is day / month / year, where the year is two figures to add to
2000.
The format of the time is hour: minutes: seconds
6.7
Operation mode (only with battery power supply)
It is used to return the instrument to OFF mode.
If "OFF" is selected, the screen will be turned off and the instrument will cease to be
operative. Consumption will become the minimum.
The OFF mode is used to minimize battery consumption in periods when the equipment will
not be used.
To exit the OFF mode, see point 4 on page 19.
7
CONVERTER PROGRAMMING
By programming the converter the display and outputs of the instrument can be configured.
Press the (Enter) key to enter the main menu. The following screen will appear.
25