7.8.1
Slave address
In this screen the slave address can be assigned to the converter. This address must be
unique, that is, no other slave devices in the bus can have the same number.
7.8.2
Baud rate
It determines the data transmission speed. All the devices in the bus have to be configured
with the same baud rate.
7.8.3
Parity
It is used to detect communication errors. All the devices in the bus have to be configured
with the same parity .
7.8.4
Stop bits
It allows to choose the number of stop bits. All the devices in the bus have to be configured
with the same number of stop bits.
33