Table of Contents
Advertisement
3
CONVERTER INTERFACE
The MBC1 converter has a graphic LCD and a keyboard with 4 push buttons.
The keyboard has four keys to introduce the values of installation and programming. Two of
these keys are used also as cursors.
The following figure shows the functionality of the converter keys.
4
OPERATION
The converter is supplied in OFF mode. Most components are off and consumption is
minimal.
The first time the instrument is used, it must be put in ON mode.
(Down / Left) To switch between flow
rate, totalizer and flow rate / total
screens.
To change to the digit on the left.
Into the menu, to scroll down.
(Up) To switch between flow rate,
totalizer and flow rate / total screens.
To increase the digit.
Into the menu, to scroll up.
(Enter) To validate the data.
To
enter
into
programming modes of the converter.
To exit from an informative text.
(Escape) To return to the previous menu.
To exit from a screen without validating
data. To enter in working mode. To
activate the screen.
19
installation
and
Advertisement
Table of Contents
