To enter the Programming window, simply press the corresponding tab.
Changing the parameters in this screen, the different functions of the equipment can be
programmed.
Once the changes are made, press the "Send" button to save all data into the device memory.
The message "Saving program" will appear for two seconds on the converter screen. The
programming data will be stored in the memory of the converter.
12.6
Visualization
When the communication with the computer port is established (see section 12.2), the tab
"Visualization" opens. This tab lets you view real-time flow rate and totalizer, as well as the
status of the digital outputs.
It is an intuitive tool to verify that the instrument has been installed and programmed correctly.
12.7
Zero flow drift adjustment
In the case that there is a zero flow drift (Offset), it is convenient to make an adjustment.
IMPORTANT: The flowmeter is delivered with the zero flow adjusted. Do not make a new
adjustment if it is not a really necessary case. An improper adjustment can impact on
incorrect flow values.
44