Table of Contents
Advertisement
12.3
Password
The MBC1 converter can be locked so that programming data can be modified only with
previous password access.
When the converter is locked, data can be read but not modified.
By default the device is unlocked. All data can be modified by means of the program
Winsmeter MBC1.
To set a password access to a section ("Installation" or "Programming"), the section must be
unlocked. To do this, simply press the "Lock" button in the desired section.
Each section can be locked or unlocked independently. Passwords are equally independent for
each section.
Once done, the following window will appear:
41
Advertisement
Table of Contents
