Install Modules Cs1140 - Siemens Cerberus CS1140 Commissioning

3.5

Install modules CS1140

24
Fire & Security Products
Siemens Building Technologies Group
Procedure
Install the module as described in the system documentation
I-Bus ribbon cable Plug in (ensure good contact)
1
Supply cable Connect up
2
Plug in battery cables
Attach temperature sensor to the battery
Electrically isolate controls (e.g. remove relays from base)
3
4
1
2
5/24V supply
Note:
When switching off for brief periods, remove mains fuse, or remove from
power unit and from battery.
CAUTION:
G
Never connect or disconnect ribbon cable I-Bus
cable when power supply is connected!
2
G
Under no circumstances should the I-Bus from different sta-
tions be connected to one another.
I-Bus
and supply
1
e1249d 1
01.1999