Programming The System; Requirements; Overview: Commissioning Methods For The Various Detection Systems - Siemens Cerberus CS1140 Commissioning

4

Programming the system

4.1

Requirements

4.2

Overview: Commissioning Methods for the Various Detection Systems

Interactive
Interactive devices:
Localization through address al-
location (insertion/activation) or
with device identification
AnalogPLUS Devices:
Localization through address al-
location (insertion /activation)
Localized devices are allocated
to the logic elements according
to:
–the commissioning list or ground
plan
–the indexes registered with the
SmartHandy
26
Fire & Security Products
Siemens Building Technologies Group
Control unit is installed and ready for operation
Maintenance PC with installed AlgoWorks EP5 is available
System-specific data files have been generated (see document e1318):
Logic elements are linked with accompanying physical devices
Parameters have been set
User texts have been defined. Possibly use the SWT11 customer text editor.
Locations of the D-Bus devices (automatic detectors, input/output modules, manual
call points) are known
AnalogPLUS
Unit addresses are programmed
. Page 27ff
according to the order of installa-
tion
. Page 34ff
No allocation necessary
(no localization structure present)
. Page 38ff
MS9i Collective
No addresses for the
individual devices –
instead, one address
for each detector line
. Page 58ff
. Page 63
e1249d 2
01.1999