Fujitsu BS2000 SE Series Manual

Hide thumbs

Advertisement

Quick Links

English
FUJITSU Server BS2000
SE700 / SE500 / SE300
Quick Guide
User Guide
Valid for:
M2000 V6.2A
X2000 V6.2A
HNC V6.2A
Edition October 2017

Advertisement

loading

  Related Manuals for Fujitsu BS2000 SE Series

  Summary of Contents for Fujitsu BS2000 SE Series

  • Page 1 English FUJITSU Server BS2000 SE700 / SE500 / SE300 Quick Guide User Guide Valid for: M2000 V6.2A X2000 V6.2A HNC V6.2A Edition October 2017...
  • Page 2 Gesellschaft für Technik-Dokumentation mbH www.cognitas.de Copyright and Trademarks Copyright © 2017 Fujitsu Technology Solutions GmbH. All rights reserved. Delivery subject to availability; right of technical modifications reserved. All hardware and software names used are trademarks of their respective manufacturers.
  • Page 3: Table Of Contents

    Contents Introduction ........5 Calling the SE Manager .
  • Page 4 Contents Working with AIS Connect (remote service) ..... 33 How do I change the AIS Connect Service access? ....33 How do I open a shadow terminal? .
  • Page 5: Introduction

    1 Introduction The FUJITSU Server BS2000 SE Series unites the existing server lines S servers and SQ servers in the server line SE servers. Depending on requirements, the SE server contains all the system components needed for operation as an overall application: –...
  • Page 6 Introduction A detailed description of the SE Manager's functionality with the usage of the base software (M2000/X2000/HNC) V6.2A is included in the “Operation and Administration” manual and in the SE Manager's online help. U41857-J-Z125-2-76...
  • Page 7: Calling The Se Manager

    2 Calling the SE Manager 2.1 How do I log in on the SE Manager? Requirement A Management Unit is powered on. It might be necessary to power on a Management Unit (MU) first, to make the access to the SE Manager possible (see “How do I power on a Management Unit via a server rack (local console)?”...
  • Page 8: How Do I Log Out Of The Se Manager

    Log out from the SE Manager Calling the SE Manager The login window is also displayed to permit you to log in again if you have logged out or the session was terminated owing to inactivity. Enter your account and the respective password in the login window. Ê...
  • Page 9: How Do I Power On A Management Unit Via A Server Rack (Local Console)

    Calling the SE Manager Powering on the MU via the local console 2.3 How do I power on a Management Unit via a server rack (local console)? Requirement You are on the server rack of the SE server. Procedure Open the server rack Ê...
  • Page 10: How Do I Power On A Management Unit Via Irmc

    Powering on the MU via iRMC Calling the SE Manager Enter localhost into the address bar of the browser (or alternatively the FQDN of the Ê powered-on MU) and press enter: As soon as the login window is displayed, the login to the SE Manager can be performed (see “How do I log in on the SE Manager?”...
  • Page 11 Calling the SE Manager Powering on the MU via iRMC The login window opens in the work area: Enter the iRMC account admin (or another administrator account) and the current Ê password Change the initial password for the iRMC account admin immediately after the first login (see also information on page Click OK...
  • Page 12 Powering on the MU via iRMC Calling the SE Manager Switch to the iRMC window and in the navigation select Power Management→ Power Ê ON/OFF. In the Power Management content area enable the Power On option and click Accept. Answer the question Do you really want the server to ’Power On’? by clicking Confirm. Ê...
  • Page 13: Powering On, Starting Up Bs2000, Powering Off

    3 Powering on, starting up BS2000, powering off 3.1 How do I power on Server Units and additional Units via the SE Manager? Powering on the Server Unit Requirement Logging into the SE Manager as administrator, B2000 administrator or a privileged operator.
  • Page 14 Powering on further units Powering on, starting up BS2000, powering off The powered-off Server Unit is powered on. As soon as the Power status for the Server Unit is On and the monitor or Native BS2000 system have reached the status INIT_ONLY, you can boot the BS2000.
  • Page 15: How Can I Boot The Bs2000 On An Su /390

    Powering on, starting up BS2000, powering off Booting the BS2000 on an SU /390 3.2 How can I boot the BS2000 on an SU /390? Requirement Logging into the SE Manager as administrator, B2000 administrator or a privileged operator. The Power status of the SU /390 shows the value On. Procedure Switch to the BS2000 operation mode tab of the SU /390: Ê...
  • Page 16 Booting the BS2000 on an SU /390 Powering on, starting up BS2000, powering off The SVP console window opens. Press the Enter key. The MODE SELECTION FRAME appears. Ê If the SVP has already been worked with, the last frame used will appear. You reach the MODE SELECTION FRAME by entering in the entry line.
  • Page 17 Powering on, starting up BS2000, powering off Booting the BS2000 on an SU /390 You can operate the SVP console in the familiar manner using the keyboard. A virtual keyboard is also available to you for making entries on the SVP console. (Click the keyboard icon at the top right to open the virtual keyboard.
  • Page 18 Booting the BS2000 on an SU /390 Powering on, starting up BS2000, powering off To load BS2000, enter and press the Enter key. The PROGRAM Ê FUNCTION ==> ld LOAD FRAME: DETAIL-1 frame will appear. You can start execution of IPL with the entries in this frame. The frame shows, among other things, the (current and preset) load device (also called IPL or boot load device) of BS2000.
  • Page 19 Powering on, starting up BS2000, powering off Booting the BS2000 on an SU /390 Please monitor the further procedure on the BS2000 console. Take note of the console Ê messages and answer the question messages. As a large number of messages are output one after the other, question messages can also quickly “disappear”.
  • Page 20: How Can I Boot The Bs2000 On An Su X86

    Booting the BS2000 on an SU x86 Powering on, starting up BS2000, powering off 3.3 How can I boot the BS2000 on an SU x86? Requirement Logging into the SE Manager as administrator, B2000 administrator or a privileged operator. The Power status of the SU x86 shows the value On. Procedure Switch to the BS2000 system's Operation mode tab of the SU x86: Ê...
  • Page 21 Powering on, starting up BS2000, powering off Booting the BS2000 on an SU x86 Open the KVP menu with the function key [F2] (on the keyboard or on a virtual keyboard Ê on the console window): Main KVP Function Menu ========================================================================== 0 - Exit 4 - View last messages...
  • Page 22 Booting the BS2000 on an SU x86 Powering on, starting up BS2000, powering off Take note of the console messages and answer the question messages. Ê As a large number of messages are output one after the other, question messages can also quickly “disappear”.
  • Page 23: How Do I Open Or Close A Bs2000 Dialog

    Powering on, starting up BS2000, powering off Opening the BS2000 dialog 3.4 How do I open or close a BS2000 dialog? Requirement Logging into the SE Manager as administrator, B2000 administrator or a privileged operator. The BS2000 system has started up and BS2000's data communication system has started.
  • Page 24 Terminating the BS2000 dialog Powering on, starting up BS2000, powering off Terminating a BS2000 dialog and closing the dialog window Proceed as follows to close the dialog window: Terminate your dialog task using the /EXIT-JOB command (or /LOGOFF). Ê BS2000 terminates your task and the connection to BS2000 is cleared. Respond to the request PLEASE ACKNOWLEDGE by pressing the Enter key.
  • Page 25: How Do I Open A Bs2000 Console

    Powering on, starting up BS2000, powering off Opening BS2000 console 3.5 How do I open a BS2000 console? Requirement Logging into the SE Manager as administrator, B2000 administrator or a privileged operator. The BS2000 system has started up and BS2000's data communication system has started.
  • Page 26: How Can I Shut Down The Bs2000 Via The Bs2000 Console

    Shutting down BS2000 via the console Powering on, starting up BS2000, powering off 3.6 How can I shut down the BS2000 via the BS2000 console? Requirement Logging into the SE Manager as administrator, B2000 administrator or a privileged operator. The BS2000 system has started up and BS2000's data communication system has started.
  • Page 27: How Do I Power Off Server Units And Additional Units

    Powering on, starting up BS2000, powering off Powering off Server Units 3.7 How do I power off Server Units and additional Units? Shutting down the Server Unit or immediately powering it off Requirement Logging in as administrator, B2000 administrator or operator The Unit is powered on (Power status displays the value ON).
  • Page 28 Powering off additional Units Powering on, starting up BS2000, powering off Shutting down additional units or immediately powering them off Additional Units such as Management Units (also redundant MUs), HNCs (only for SU /390) and Application Units are powered off in the same way as the Server Unit. Requirement Login as administrator, BS2000 administrator (MU, HNC only), Operator (MU, HNC only) or AU administrator (AU only)
  • Page 29: Powering On/Off Application Units

    Application Units are displayed in the tree structure as <unit name>(AU<model>). When a partitionable AU is supported as an appliance delivery on the basis of Oracle VM Server from FUJITSU, it is displayed as a Database Unit with the short name DBU87. Otherwise the short name is displayed.
  • Page 30 Powering on/off via iRMC Powering on/off Application Units Click iRMC and Open in the Operation tab in the Operation group. Ê In the case of a partitionable AU (e.g. AU87), systems run on the individual partitions of the AU. You operate a partition via the Management Board. Open the web interface of the Management Board in the Operation group instead of the iRMC: Click Login in the window of the iRMC's web interface, enter user name and password...
  • Page 31 Powering on/off Application Units Powering on/off via iRMC In the navigation select Power Management→ Power ON/OFF. In the Power Control group Ê activate the option you require (Graceful Reset (Reboot) is selected in the example) and click Accept: Reply to the subsequent question by clicking Confirm. Ê...
  • Page 32: How Do I Power On/Off An Au Via The Se Manager

    Powering on/off via the SE Manager Powering on/off Application Units 4.2 How do I power on/off an AU via the SE Manager? Requirement Login as administrator or AU administrator Procedure In the Units table of the desired AU click the Power on/off icon: Ê...
  • Page 33: Working With Ais Connect (Remote Service)

    5 Working with AIS Connect (remote service) 5.1 How do I change the AIS Connect Service access? Requirement Login as administrator Procedure Click the Remote Service tab next to the MU in the Service menu: Ê Click the pencil icon in the Service access Management Unit group: Ê...
  • Page 34: How Do I Open A Shadow Terminal

    How do I open a shadow terminal? Working with AIS Connect (remote service) Select the required setting for the service access (here: Allow access, shadow possible) Ê and click Change: 5.2 How do I open a shadow terminal? Requirement Logging in as administrator, B2000 administrator or operator Procedure Click the Remote Service tab next to the MU in the Service menu: Ê...
  • Page 35: How Do I Restart The Ais Connect Service Agent

    Working with AIS Connect (remote service) How do I restart the AIS Connect Service Agent? Enter to find active sessions (displayed in the format Ê screen -ls <pid1>.<pid2>.<pid3>). Enter to connect the shadow terminal with the Ê screen -x <pid1>.<pid2>.<pid3> required service session and to follow the session.
  • Page 36: How Do I Delete The Ais Session Logging Files

    How do I delete the AIS session logging files? Working with AIS Connect (remote service) Click the Restart symbol in the AIS Connect Service Agent group: Ê 5.4 How do I delete the AIS session logging files? Requirement Login as administrator Procedure Click the CLI tab next to the MU in the Management menu: Ê...
  • Page 37 Working with AIS Connect (remote service) How do I delete the AIS session logging files? Optional: Enter to previously list the existing AIS session logging files. Ê aisLog -l Enter to delete the existing AIS session logging files. Ê aisLog -r U41857-J-Z125-2-76...
  • Page 38 How do I delete the AIS session logging files? Working with AIS Connect (remote service) U41857-J-Z125-2-76...
  • Page 39: Notes For Error Situations

    6 Notes for error situations In case error situations occur, you may have to take screenshots of the SE Manager, generate diagnostic data within a timely manner and deploy them to the Customer Support. 6.1 How do I generate diagnostic data? Requirement Login as administrator, BS2000 administrator, Operator or XenVM administrator (SU x86 only)
  • Page 40: How Do I Deploy Diagnostic Data For The Customer Support

    How do I deploy diagnostic data for the Customer Support? Notes for error situations Confirm the request with Generate 6.2 How do I deploy diagnostic data for the Customer Support? Requirement Login as administrator Procedure Click the Diagnosis tab in the Service menu by the requested unit (MU, SU x86 or HNC): Ê...
  • Page 41: Index

    Index Account, SE Manager KVP menu AIS Connect changing the service access load device 18, deleting session logs local console rebooting a service agent aisLog (CLI Kommando) Management Board Management Unit boot load device 18, powering on 9, BS2000 powering on via iRMC opening console powering on via the local console shutting down...
  • Page 42 Index Server Unit powering off powering on service access Session timeout shadow terminal, opening shutdown SVP commands SVP console window Terminating the BS2000 dialog unit powering off powering on Welcome page SE Manager U41857-J-Z125-2-76...

This manual is also suitable for:

Bs2000 se700Bs2000 se500Bs2000 se300