Fujitsu BS2000 SE Series Operating Manual

Server unit /390
Hide thumbs

Advertisement

Quick Links

English
Fujitsu Server BS2000 SE Series
Server Unit /390
Operating Manual
Valid for:
SE700(B) / SE500(B) (basic software V6.2A and higher)
SE710 (basic software V6.3A and higher)
Edition December 2019

Advertisement

loading

  Related Manuals for Fujitsu BS2000 SE Series

  Summary of Contents for Fujitsu BS2000 SE Series

  • Page 1 English Fujitsu Server BS2000 SE Series Server Unit /390 Operating Manual Valid for: SE700(B) / SE500(B) (basic software V6.2A and higher) SE710 (basic software V6.3A and higher) Edition December 2019...
  • Page 2 9001:2015 Copyright and Trademarks Copyright © 2020 Fujitsu Technology Solutions GmbH. All rights reserved. Delivery subject to availability; right of technical modifications reserved. All hardware and software names used are trademarks of their respective manufacturers. The Xen® mark is a trademark of Citrix Systems, Inc., which manages the mark on behalf of the Xen open source community.
  • Page 3: Table Of Contents

    Table of Contents Server Unit /390 ........... . . 5 1 Introduction .
  • Page 4 4.5.4 Setting up PROGRAM LOAD FRAME PRESET2 ..... 65 4.5.5 Executing IPL in PROGRAM LOAD FRAME: DETAIL-1 ....67 4.5.6 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2 .
  • Page 5: Server Unit /390

    Server Unit /390 Server Unit /390...
  • Page 6: Introduction

    The Operating Manual consists of a number of modules and describes the features and hardware components of the FUJITSU BS2000 servers of the SE series. Users should read the operating manuals carefully in order to obtain optimal performance from the SE server.
  • Page 7: Server Unit Su700 / Su710

    Server Unit /390 2 Server Unit SU700 / SU710 This section describes the Server Units SU700, SU700B and SU710. The SE server SE700(B) is equipped with an SU700(B) as the first Server Unit. The SE server SE710 contains an SU710. Components and ports which are not used are not described below.
  • Page 8: Server Unit Su500

    Server Unit /390 3 Server Unit SU500 This section describes the Server Unit SU500. SE500 is equipped with an SU500 as the first Server Unit. Components and ports which are not used are not described below. The SU500 enables BS2000 to execute (in Native mode or on BS2000 VMs) on /390 architecture. Features 6 models with a high performance range are available.
  • Page 9: Operating The Service Processor

    Server Unit /390 4 Operating the service processor The service processor (SVP) is operated under menu guidance via the “SVP Console Window”. The SVP console window is made available by the SE Manager when the SVP console is called. Jobs are assigned to the service processor via special SVP frames (in this chapter abbreviated to: frames). All the information you require as an operator working with the frames can be found in this chapter.
  • Page 10: Opening The Svp Console

    Server Unit /390 4.1 Opening the SVP console > Proceed as follows to log in on the SE Manager as an administrator: When you log in as an operator, the account must have the SVP right. After you have logged in successfully, you can access the functions of the SE Manager and consequently also those for operating the operating system (BS2000 or VM2000) on the Server Unit.
  • Page 11 Server Unit /390 CAUTION! When the SVP frame is opened again or when another SVP console is opened by another user, the window content is not displayed in full. Click on CLEAR. This causes the screen to be refreshed, i.e. the frame that was last output is displayed again in its entirety.
  • Page 12: General Svp Frame Structure

    Server Unit /390 4.2 General SVP frame structure Figure 1: General structure of a frame Each frame is divided into different areas: Lines 1 - 21 This is the display area of a frame. Here the functions and parameters that may be selected or output are displayed.
  • Page 13: System Status Messages In Line 22

    Server Unit /390 4.2.1 System status messages in line 22 Figure 2: Format of the status display in line 22 Meaning of the status information in line 22: Column Icon Meaning 17 - 20 CL -n Cluster ID of the Server Unit (n = 0 - 3) 22 - 26 none The system is operated in BS2000-NATIVE mode...
  • Page 14 Server Unit /390 58 - 80 none The system is in the run status PSW = The system is in the stop status on the PSW address (PSW=Program Status Word)
  • Page 15: System Status Messages In Line 23

    Server Unit /390 4.2.2 System status messages in line 23 The following picture shows the extended area of the system status messages in line 23: Figure 3: Format of the extended area of the status display in line 23 Meaning of the status messages in line 23: Column Icon Meaning...
  • Page 16: Hardware Status Display In Line 24

    Server Unit /390 4.2.3 Hardware status display in line 24 The following diagram shows the format of the hardware status display in line 24: Figure 4: Format of the status display in lines 24 and 25 Meaning of the status information in line 24: Column Icon Meaning...
  • Page 17: Status Displays In Line 25

    Server Unit /390 4.2.4 Status displays in line 25 Displays in line 25 of the SVP console and their meaning: Column Icon Meaning The console is ready The SVP is active 10 - 25 none The SVP is ready for input Input locked WAIT After input the keyboard is locked until output is completed...
  • Page 18 Server Unit /390 61 - 64 FEHL Input when keyboard is locked 76 - 79 EM:1 Emulation level 1 To delete the message and switch the display of line 25, click on ModSel.
  • Page 19: Using Svp Frames

    Server Unit /390 4.3 Using SVP frames You assign a job to the SVP by invoking the relevant frame, selecting the desired function, and specifying the required parameters. To select a function or specify a parameter, you must enter the alphanumeric characters shown in the frame in the input fields marked by an arrow ( ).
  • Page 20: Svp Functions (Function Keys)

    Server Unit /390 4.3.1 SVP functions (function keys) A virtual keyboard is available to you for making entries on the SVP console. > Click the keyboard icon at the top right to open the virtual keyboard. Clicking the icon again closes the keyboard.
  • Page 21 Server Unit /390 RETURN ESC F3 Return Switches to the preceding frame. ESC F4 Frame-specific function is performed. ESC F5 Frame-specific function is performed. Can/Erase ESC F6 Cancel/ Command or input data is deleted. Erase Input Page up ESC F7 Page up The previous screen contents are displayed Page down...
  • Page 22 Server Unit /390 PF24 ModChg ModeChange Switches back and forth between FJ-PROGRAM FRAME and SVP FRAME (for Customer Support only if appropriate settings apply!) Cancel Cancel/Reset Cancel input, release keyboard Clear Refresh The last frame output is displayed again. /Clear All inputs of the current frame made to date are reset.
  • Page 23: Switching Between Svp Frames

    Server Unit /390 4.3.2 Switching between SVP frames A switch between the frames is only possible within a specified scheme or via an FR command. The possible switches between the frames are possible: Figure 5: Switching between the frames Explanation of the figure: The frames are represented by this symbol: ML MODE SELECTION FRAME Each frame has an ID consisting of two letters derived from the frame name.
  • Page 24: Options For Switching Between Frames

    Server Unit /390 4.3.3 Options for switching between frames The following table shows the options for switching to another frame in the SVP window. Button Effect INDEX Only in CE mode: by clicking on this button you switch from any frame directly to the index frame. The selection of the desired frame can then be made by entering the frame ID in the index frame.
  • Page 25: Svp Frames And Subframes

    Server Unit /390 4.4 SVP frames and subframes The frames are used by the operator for sending jobs to the SVP and for receiving replies from the SVP. Some frames have up to seven subframes. The subframes contain other, more detailed functions and information which does not fit in the main frame.
  • Page 26: Ml) Mode Selection Frame

    Server Unit /390 4.4.1 (ML) MODE SELECTION FRAME ---- MODE SELECTION FRAME ----- E90L01G FUNCTION=> - EXECUTION - - SELECTION - CPU SELECT=> - 0 1 2 3 4 *1 CPU STOP *LD PROGRAM LOAD *ST STATUS DISPLAY *2 INTERRUPT *MA MANUAL OPERATION STOP/START MODE=>...
  • Page 27 Server Unit /390 CAUTION! The functions are executed according to the entries in the CPU SELECT and STOP/START MODE fields (see table on next page)! CPU STOP stops either the CPU selected in the CPU SELECT and STOP/START MODE fields or all CPUs INTERRUPT creates an external interrupt for the CPU selected in the fields CPU SELECT and STOP/START MODE...
  • Page 28 Server Unit /390 TOD ENABLE SYSTEM RESET all CPUs SYSTEM RESET CLEAR –: unusable...
  • Page 29: Ld) Program Load Frame: Basic

    Server Unit /390 4.4.2 (LD) PROGRAM LOAD FRAME: BASIC ----- PROGRAM LOAD FRAME: BASIC ----- E90L01G -LOAD FUNCTION- ==> *1 START AUTO *2 START FAST *3 START DIAL *4 START *5 SYSTEM DUMP *ENTER EXECUTE *PF7 GO TO DETAIL-1 *FR AU5 GO TO PRESET(AU5 FRAME) CL-0 CPU-0 CHP-0...
  • Page 30 Server Unit /390 Frame-specific functions ENTER Executes IPL / SYSTEM DUMP After making your entries in the mask and pressing the ENTER key, the following prompt will appear: *********************************** * ARE YOU SURE ? (ENTER Y OR N) N * *********************************** CAUTION! The IPL must not be executed during system operation! If this instruction is not heeded,...
  • Page 31: Ld) Program Load Frame: Detail-1

    Server Unit /390 4.4.2.1 (LD) PROGRAM LOAD FRAME: DETAIL-1 ----- PROGRAM LOAD FRAME: DETAIL-1 ----- E90L01G -LOAD FUNCTION- -IPL DEVICE- ==> ==> 2 *1 START AUTO *1 PRESET GROUP ------------------+ *2 START FAST >*2 CURRENT GROUP --------+ *3 START DIAL *3 UNIT ADDRESS -+ *4 START A108...
  • Page 32 Server Unit /390 START not used SYSTEM DUMP executes SLED LOAD CLEAR clears main memory before IPL LOAD NON CLEAR does not clear main memory before IPL Functions 6 or 7 must be used for an IPL from a real or emulated tape device. In addition, function 3 must be selected at MT CONTROL (see "(LD) PROGRAM LOAD FRAME: DETAIL-1"...
  • Page 33 Server Unit /390 NL-REWIND rewind then load SL-REWIND rewind, skip label then load Function 3 must be selected for an IPL of a real or emulated tape device. Frame-specific function ENTER Executes IPL / SYSTEM DUMP After making your entries in the mask and pressing the ENTER key, the following prompt will appear: *********************************** * ARE YOU SURE ? (ENTER Y OR N) N * ***********************************...
  • Page 34: Ld) Program Load Frame: Detail-2

    Server Unit /390 4.4.2.2 (LD) PROGRAM LOAD FRAME: DETAIL-2 ----- PROGRAM LOAD FRAME: DETAIL-2 ----- E90L01G -VM MODE- -IPL EXECUTION- ==> 2 ==> 1 *1 NATIVE >*1 ENABLE >*2 AVM/EX *2 DISABLE *ENTER EXECUTE *PF3 GO TO BASIC FRAME *PF9 GO TO DETAIL-1 CL-0 CPU-0 CHP-0...
  • Page 35 Server Unit /390 Frame-specific functions ENTER Sets operating mode. > After selecting the firmware to be loaded in the field and entering in the VM MODE ==> field, press the ENTER key. EXECUTION ==> The following prompt appears on the screen: *********************************** * ARE YOU SURE ? (ENTER Y OR N) N * ***********************************...
  • Page 36: St) Status Display Frame

    Server Unit /390 4.4.3 (ST) STATUS DISPLAY FRAME Figure 10: STATUS DISPLAY FRAME screen This frame informs you about the current status of the server and its individual components (power on/off, online /offline, normal/maintenance state, etc.). Components which are not installed are not displayed. At most the following components are possible: CPU: through...
  • Page 37: Ma) Manual Operation Frame

    Server Unit /390 4.4.4 (MA) MANUAL OPERATION FRAME Figure 11: MANUAL OPERATION FRAME screen By making an entry in this frame and pressing the ENTER key, you can perform various manual operations. Instructions on this frame are only executed when the CPU has been stopped (see message in frame line 23). The CPU status is displayed in line 22.
  • Page 38 Server Unit /390 The following table shows the additional entries required for each of the three main functions in other input fields: Input field Function RATE UNIT ADRS ADRS ADRS ADRS CONTROL ADRS TYPE COMPSELECT COMPMODE 1 RATE CONTROL 2 ADRS COMP STOP x 3 FIRM DUMP 4 HSA DUMP o: entry required...
  • Page 39 Server Unit /390 OFETCH & OSTORE operand read and write address Device address for output of a firmware dump UNIT ADRS => ADRS SET => Compare stop address XXXX address space larger than 32 bits XXXXXXXX 32-bit address ADRS COMP MODE => Address compare stop mode RESET Switches off address compare stop and resets address compare stop conditions in the...
  • Page 40: Ad) Alter/Display Frame

    Server Unit /390 4.4.5 (AD) ALTER/DISPLAY FRAME Figure 12: ALTER/DISPLAY FRAME screen By making an entry in this frame and pressing the ENTER key, you can use this frame to display and change the contents of the main memory and the memory protect key. Instructions on this frame are only executed when the CPU has been stopped (see message in frame line 23).
  • Page 41 Server Unit /390 absolute address memory protect key A-VIRTUAL address space virtual address H-VIRTUAL basic address space virtual address ADRS => Memory address XXXX address space larger than 32 bits XXXXXXXX 32-bit address Frame-specific functions PF9 When you click on this button, the following subframe is displayed: Figure 13: ALTER/DISPLAY FRAME screen By making the appropriate entries and pressing the ENTER key, you can use this frame to change and display the contents of important CPU registers.
  • Page 42 Server Unit /390 FUNCTION => The following function is selected after the corresponding letter has been entered: ALTER change and modify register contents DISPLAY display register contents FACILITY => Possible displays of registers: General register Program status word Control register Feature control register Floating-point register Prefix register...
  • Page 43: Me) Message Frame

    Server Unit /390 4.4.6 (ME) MESSAGE FRAME ----- MESSAGE FRAME ----- E90L01G NEWEST LINE = 0776 LINE ID MESSAGE MM/DD HH:MM:SS 0759 01 X2LA9 FUNCTION: ST 03/25 14:47:23 0760 01 X2SA9 SSU0 03/25 14:48:56 0761 01 E2SA1 COMMAND NOT FOUND 03/25 14:48:56 0762 01 X2SA9 PF 8 03/25 14:49:14...
  • Page 44: Ch/Subch Status Display Frame: Channel

    Server Unit /390 4.4.7 (CH) CH/SUBCH STATUS DISPLAY FRAME: CHANNEL Figure 15: CH/SUBCH STATUS DISPLAY FRAME: CHANNEL screen By making entries in the input fields and pressing the ENTER key, you display the status of the I/O system. Further subframes are supplied in conjunction with FUNCTION 2 to 5. FUNCTION =>...
  • Page 45 Server Unit /390 CHPID => channel path number 000 ... 0FF logical channel address LCHADR => no input required LINKADR => link address for type-S channel (not supported on SU /390) LCUADR => logical control unit address no input required PCHAD =>...
  • Page 46: Au) Auxiliary Frame: Menu

    Server Unit /390 4.4.8 (AU) AUXILIARY FRAME: MENU Figure 16: AUXILIARY FRAME: MENU screen You can move to other frames by making entries in this menu frame and pressing the ENTER key. SELECTION => The following subframes are displayed on the screen by entering the appropriate number: 1 REAL CLOCK displaying/setting SVP clock "(AU1) AUXILIARY FRAME: REAL CLOCK"...
  • Page 47: Au1) Auxiliary Frame: Real Clock

    Server Unit /390 4.4.8.1 (AU1) AUXILIARY FRAME: REAL CLOCK ----- AUXILIARY FRAME: REAL CLOCK ----- E90L01G-03C+030 YYYY MM DD HH MM SS 2015.01.25 15:26:47 *PF6 CANCEL *PF12 TIMER SET CL-0 CPU-0 CHP-0 []-[]00 Figure 17: AUXILIARY FRAME: REAL CLOCK screen When the screen is invoked, the current date and time of the SVP are displayed.
  • Page 48: Au2) Auxiliary Frame: Iorsf Control

    Server Unit /390 4.4.8.2 (AU2) AUXILIARY FRAME: IORSF CONTROL Figure 18: AUXILIARY FRAME: IORSF CONTROL screen The IORSF files are displayed in this frame. The file number of the current IORSF is displayed in the CURRENT field. NO. = When you select a function and press the ENTER key, parameters are requested in the other input fields. Once you have entered the parameters and pressed the ENTER key, the functions for the IORSF files are executed.
  • Page 49 Server Unit /390 SPECIFY SWAP NO. Enter the numbers of two IORSF files which are to be swapped. You can only make entries if you select function beforehand. 'blank''blank' <=> 'blank'blank' SAVE NO. OR A(ALL) ==> Specify the number of the IORSF file which is to be saved. Specifying "A" 'blank' saves all IORSF files.
  • Page 50: Au3) Auxiliary Frame: Related Scb's

    Server Unit /390 4.4.8.3 (AU3) AUXILIARY FRAME: RELATED SCB'S Figure 19: AUXILIARY FRAME: RELATED SCB’S screen Changes in this frame are reserved for the Customer Support.
  • Page 51: Au4) Auxiliary Frame: Power Stand-By/Impl

    Server Unit /390 4.4.8.4 (AU4) AUXILIARY FRAME: POWER STAND-BY/IMPL ----- AUXILIARY FRAME: POWER STAND-BY/IMPL ----- E90L01G FUNCTION=> *1 POWER STAND-BY *2 IMPL CL-0 CPU-0 CHP-0 []-[]00 Figure 20: AUXILIARY FRAME: POWER STAND-BY/IMPL screen By making an entry in this frame and pressing the ENTER key, you can switch the server off or re-initialize it. FUNCTION =>...
  • Page 52: Au5) Auxiliary Frame: Load Preset1

    Server Unit /390 4.4.8.5 (AU5) AUXILIARY FRAME: LOAD PRESET1 ----- AUXILIARY FRAME: LOAD PRESET1 ----- E90L01G -START MODE- -IPL DEVICE- ==> 1 >1 START AUTO 1 PRESET GROUP -----------------+ *2 START FAST 2 CURRENT GROUP --------+ *3 START DIAL 3 UNIT ADDRESS -+ *4 START A108 A108...
  • Page 53 Server Unit /390 DISABLE does not execute IPL, i.e. IPL must be triggered manually using PROGRAM LOAD FRAME: BASIC or PROGRAM LOAD FRAME: DETAIL-1 INITIAL FRAME Here you can set the display form of the PROGRAM LOAD FRAME. ==> LOAD FRAME PROGRAM LOAD FRAME: BASIC (see "(LD) PROGRAM LOAD FRAME: (BASIC)
  • Page 54 Server Unit /390 AVM/EX for VM2000 START IPL NO ==> Selection of the IPL Start Mode number FIX(1) Start Mode number 1 (automatic start) CURRENT not used on the Server Unit Frame-specific functions PF12 Storing settings switches to the LOAD PRESET1 screen...
  • Page 55: Mf) Msf Frame

    Server Unit /390 4.4.9 (MF) MSF FRAME ----- MSF FRAME: FLAG CODE LOG DISPLAY ----- E90L01G INITIALIZED 2010.03.11 15:43:23 LAST SEQ 0538 NODE:SELF 1/14 UNIT FLAG CODE DATE TIME KIND LINK INFORMATION *0538 A9 7M12 3C 006D2H00 03.16 16:50:42 ATTN HC27 SP4 AW 026D 0C 006D0H00 *0537...
  • Page 56: Pa) Performance Analyzer Frame

    Server Unit /390 4.4.10 (PA) PERFORMANCE ANALYZER FRAME ---- PERFORMANCE ANALYZER FRAME ---- E90L01G FUNCTION => STATUS DISABLE / STOP 1 ENABLE & ITEM SELECT LOGGING STOP 2 DISABLE 3 START & DISPLAY ------- CH BUSY LEVEL ------- 4 START & CH BUSY 0 <...
  • Page 57: Examples Of Svp Operation

    Server Unit /390 4.5 Examples of SVP operation This chapter contains examples of the following tasks: Selecting IORSF Activating IORSF Setting up PROGRAM LOAD FRAME PRESET1 Setting up PROGRAM LOAD FRAME PRESET2 Executing IPL in PROGRAM LOAD FRAME: DETAIL-1 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2...
  • Page 58: Selecting Iorsf

    Server Unit /390 4.5.1 Selecting IORSF The steps described below are required to load a specific IORSF the next time IMPL takes place or the next time the system is switched on. IORSF with Level 2 is selected in the example below. Requirement You are logged in to the SE Manager and have opened the SVP console.
  • Page 59 Server Unit /390 > enter the command in line 24 and press the ENTER key. FR AU The AUXILIARY FRAME: MENU screen is displayed: Figure 26: AUXILIARY FRAME: MENU screen...
  • Page 60 Server Unit /390 Invoking IORSF Control Frame > Enter in the SELECTION=> field. Press the ENTER key. If the frame code is entered in the MODE SELECTION FRAME or the command is FR AU2 entered in line 24, the following frame is displayed immediately. The AUXILIARY FRAME: IORSF CONTROL screen is displayed: Figure 27: AUXILIARY FRAME: IORSF CONTROL screen The first four IORSFs are displayed in the upper portion of the screen.
  • Page 61: Activating Iorsf

    Server Unit /390 4.5.2 Activating IORSF The set IORSF must be activated with an IMPL: Requirement You are in the AUXILIARY FRAME: IORSF CONTROL. > Click on RETURN to switch back to the AUXILIARY FRAME: MENU. > Enter in the SELECTION=> field. Press the ENTER key. The AUXILIARY FRAME: POWER STAND-BY/IMPL screen is displayed: ----- AUXILIARY FRAME: POWER STAND-BY/IMPL ----- E90L01G...
  • Page 62: Setting Up Program Load Frame Preset1

    Server Unit /390 4.5.3 Setting up PROGRAM LOAD FRAME PRESET1 In this example, you specify: LOAD function 1 with the name AUTO (AUTO=Automatic Startup) for a POWER ON IPL Device number of the IPL device to be used for a POWER ON IPL (currently A108) Automatic IPL after a POWER ON The LOAD FRAME should always be displayed as PROGRAM LOAD FRAME: DETAIL-1.
  • Page 63 Server Unit /390 > Enter in the SELECTION=> field. Press the ENTER key. The AUXILIARY FRAME: LOAD PRESET1 screen is displayed: ----- AUXILIARY FRAME: LOAD PRESET1 ----- E90L01G -START MODE- -IPL DEVICE- ==> 1 >1 START AUTO 1 PRESET GROUP -----------------+ *2 START FAST 2 CURRENT GROUP --------+ *3 START DIAL...
  • Page 64 Server Unit /390 The values entered are saved and thus made known to the SVP. These settings are accessed for each IPL.
  • Page 65: Setting Up Program Load Frame Preset2

    Server Unit /390 4.5.4 Setting up PROGRAM LOAD FRAME PRESET2 In the PROGRAM LOAD FRAME PRESET2 you specify which operating mode is to be set after the server is switched on. The following are specified in the example below: VM2000 operating mode Automatic startup of the operating system Requirement You are in the AUXILIARY FRAME: LOAD PRESET1.
  • Page 66 Server Unit /390 > Click on PF12 The values entered are saved and thus made known to the SVP. These settings are accessed for each IPL.
  • Page 67: Executing Ipl In Program Load Frame: Detail-1

    Server Unit /390 4.5.5 Executing IPL in PROGRAM LOAD FRAME: DETAIL-1 The IPL can be executed manually according to the setting using PROGRAM LOAD FRAME DETAIL-1. The following are specified in the example below: loading VM2000 dialog startup IPL device is specified manually by the entry of the unit address (here: loading the VM2000 from a device with the unit address A108) Requirement You are in the AUXILIARY FRAME: LOAD PRESET2 screen.
  • Page 68 Server Unit /390 ----- PROGRAM LOAD FRAME: DETAIL-1 ----- E90L01G -LOAD FUNCTION- -IPL DEVICE- ==> ==> 2 *1 START AUTO *1 PRESET GROUP ------------------+ *2 START FAST >*2 CURRENT GROUP --------+ *3 START DIAL *3 UNIT ADDRESS -+ *4 START A108 A108 A108...
  • Page 69 Server Unit /390 ----- PROGRAM LOAD FRAME: DETAIL-1 ----- E90L01G -LOAD FUNCTION- -IPL DEVICE- ==> 3 ==> 3 *1 START AUTO *1 PRESET GROUP ------------------+ *2 START FAST >*2 CURRENT GROUP --------+ *3 START DIAL *3 UNIT ADDRESS -+ *4 START A108 A108 A108...
  • Page 70 Server Unit /390 Execute IPL > Press the ENTER key after you have checked all the settings. The following prompt appears on the screen: *********************************** * ARE YOU SURE ? (ENTER Y OR N) N * *********************************** CAUTION! The IPL must not be executed during system operation! If this instruction is not heeded, BS2000 will be aborted! >...
  • Page 71: Setting Operating Mode Via Program Load Frame: Detail-2

    Server Unit /390 4.5.6 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2 The operating mode can be set anew according to the setting using PROGRAM LOAD FRAME: DETAIL-2. This selects the appropriate firmware for running BS2000 or VM2000. The following are specified in the example below: VM2000 operating mode executing IPL after reloading the firmware Requirement...
  • Page 72 Server Unit /390 Storing settings After you have checked all the settings, click on PF9 to store them and to switch to PROGRAM LOAD FRAME: DETAIL-1. The new setting is displayed under VM MODE: in the DETAIL-2 STATUS field. VM MODE: AVM/EX is now displayed.
  • Page 73: Hnc (High-Speed Net Connect)

    Detailed information on operating the HNC is provided in the "Operation and Administration" manual [ ]. Detailed information on the various hardware components and interfaces of the HNC is provided in the data sheet "FUJITSU Server BS2000 SE Series". See the product site for the relevant server at http://www.fujitsu.com...
  • Page 74: Front Of The Hnc

    Server Unit /390 5.1 Front of the HNC Figure 34: HNC M1 - front Figure 35: HNC M2/M3 - front Indicators on the front panel of HNC M1 Figure 36: HNC M1 (front panel) Meaning HDD/SDD error indicator PSU fault indicator Temperature fault indicator CPU fault indicator (notify Customer Support) Storage fault indicator (notify Customer Support)
  • Page 75 Server Unit /390 HDD/SSD activity indicator Status indicator On/Off button NMI button (for Customer Support only) Reset button (for Customer Support only) ID button Open/close optical drive Optical drive activity indicator ID card (green) Indicators on the front panel of HNC M2/M3 Figure 37: HNC M2/M3 (front panel) Meaning Reset button (for Customer Support only)
  • Page 76 Server Unit /390 Optical drive activity indicator Open/close optical drive ID card (green); further left, above HDD module Optical drive and USB interfaces The DVD-RW drive is used by Customer Support to install and update the HNC software. Use of the USB interfaces is reserved for Customer Support.
  • Page 77: Controls

    Server Unit /390 5.1.1 Controls Identification (ID) button Lights up (blue) on the front and on the rear of the HNC when the ID button is pressed. The two ID indicators are synchronized. On/Off button When the HNC is switched off, it is switched on again by pressing the On/Off button once. When the HNC in is in operation, it is switched off by pressing the On/Off button once.
  • Page 78 Server Unit /390 Indicators on the operating panel Power-on indicator (three colors) Lights up orange when the HNC is switched off but line voltage is present. Lights up yellow during power up delay. If the HNC is switched off and then immediately switched on again, it is only restarted after a power up delay.
  • Page 79 Server Unit /390 Hard disk drive control indicators Figure 38: Front - Detailed view: Indicators on a hard disk module Meaning HDD BUSY (green) Lights up: HDD in active phase Does not light up: HDD inactive HDD FAULT (orange) (in conjunction with a RAID controller) Does not light up: no HDD error Lights up: HDD Faulty or Rebuild Stopped (drive defective, needs replacing, a rebuild process was stopped or the HDD module is not correctly inserted)
  • Page 80: Rear Of The Hnc

    Server Unit /390 5.2 Rear of the HNC Figure 39: HNC M1 - rear Figure 40: HNC M2 - rear Figure 41: HNC M3 - rear ID/CSS/Global error indicator Figure 42: ID/CSS/Global error indicator (HNC M1)
  • Page 81 Server Unit /390 Figure 43: ID/CSS/Global error indicator (HNC M2) Figure 44: ID/CSS/Global error indicator (HNC M3) Meaning ID/CSS/Global error indicator...
  • Page 82 Server Unit /390 Element Meaning ID indicator (blue) Lights up blue when the HNC has been selected by pressing the ID button. To deactivate, press the button again. CSS and Global error indicator (yellow/orange) Generally, the states of these indicators have the following meanings: Do not light up when the HNC is OK.
  • Page 83 Server Unit /390 Figure 46: LAN indicators (HNC M2) Figure 47: LAN indicators (HNC M3) Meaning LAN activity indicator Lights up green if a LAN connection exists. Does not light up if no LAN connection exists. Flashes green when a LAN transfer is in progress. LAN speed indicator Lights up yellow for a LAN transfer rate of 1 Gbps.
  • Page 84 Server Unit /390 Indicator on hot-plug power supply unit Figure 48: Indicator on hot-plug power supply unit Meaning Indicator on hot-plug power supply unit (two colors) Flashes green when the HNC is switched off, but line voltage is present (standby mode). Lights up green when the HNC is switched on and functioning properly.
  • Page 85 Server Unit /390 Assignment of the PCIe slots The assignment of the PCIe slots differs for HNC M1, M2 and M3. PCIe slot assignment of HNC M1 Figure 49: Principle of PCIe slot assignment at the rear of the device (HNC M1) PCIe slot Assignment Not assigned;...
  • Page 86 Server Unit /390 PCIe slot assignment of HNC M2 Figure 50: Principle of PCIe slot assignment at the rear of the device (HNC M2) PCIe Assignment slot 4-port LAN card FibreChannel card not assigned; an additional 4-port LAN card or a 10 GbE LAN card with 2 optical or RJ45 interfaces are optional Table 3: PCIe slot assignment on an HNC M2 PCIe slot assignment of HNC M3...
  • Page 87: What To Do If

    Server Unit /390 6 What to do if ... In this chapter you are told how the Server Unit informs you about hardware faults and how you perform a system dump when inexplicable system downtime occurs. In the event of hardware faults the operating system will take the necessary recovery action autonomously. Customer Service is automatically informed by means of a Service Call and initiates repair measures, possibly in conjunction with the customer.
  • Page 88 Server Unit /390 Information on SLED operation is provided in the "Introduction to System Administration" manual [ ].
  • Page 89: Related Publications

    You can find the following BS2000 manuals on the manual server with the BS2000 documentation at http://bs2manuals.ts.fujitsu.com Other manuals, for example descriptions of the FUJITSU PRIMERGY and PRIMEQUEST servers, can be found on the general FUJITSU manual server at http://manuals.ts.fujitsu.com...