Fujitsu BS2000 SE Series Operating Manual page 47

Operating the service processor
4
5
NEXT POWER ON RESET NO. => Enter the number of the IORSF file which is to be
SPECIFY SWAP NO.ËË<=>ËË Enter the numbers of two IORSF files which are to be
SAVE NO. OR A(ALL) ==> Ë Specify the number of the IORSF file which is to be saved.
RESTORE NO. ==> Ë Specify the number of the IORSF file which is to be restored. You
Frame-specific functions
[Page down]
[Page up]
[PF8]
U41859-J-Z126-2-76
SAVE
RESTORE
activated after the next IMPL. You can only make an entry if you
select function
swapped. You can only make entries if you select function
beforehand.
Specifying "A" saves all IORSF files. You can only make entries if you
select function
can only make entries if you select function
Sets 4 to 7 are displayed
Sets 0 to 3 are displayed
The next page is displayed.
saves one or all IORSFs: enter the number or the
value (All) in the field
A
SAVE NO. OR A(ALL) ==> Ë
restores an IORSF: enter the numbers in the field
RESTORE NO. ==> Ë
beforehand.
1
beforehand.
4
SVP frames and subframes
3
beforehand.
5
47