Operating the service processor
Storing settings
After you have checked all the settings, click on [PF9] to store them and to switch to
Ê
PROGRAM LOAD FRAME: DETAIL-1.
The new setting is displayed under VM MODE: in the DETAIL-2 STATUS field. VM
MODE: AVM/EX is now displayed. The firmware is relocated before the IPL is executed.
By filling PROGRAM LOAD FRAME: DETAIL-1 and pressing the [ENTER] you can
execute the IPL (see
Make sure you fill in the PARMS field correctly.
U41859-J-Z126-2-76
page
64).
Examples of SVP operation
67