Fujitsu BS2000 SE Series Operating Manual page 21

Operating the service processor
PF.. Function key of the
virtual keyboard
PF16 [PF16]
PF17 [PF17]
PF18 [Step]
PF19 [PF19]
PF20
PF21 [START]
PF22 [PF22]
PF23 [ModSel]
PF24 [ModChg]
[Cancel]
[Clear]
Table 1: Function keys for SVP functions (part 2 of 2)
U41859-J-Z126-2-76
Alternative entry on
the keyboard
[ESC] [SHIFT] [F6]
[ESC] [SHIFT] [F7]
[ESC] [SHIFT] [F8]
[ESC] [SHIFT] [F9]
[ESC] [SHIFT] [F10]
[SHIFT] [F5]
[SHIFT] [F6]
[SHIFT] [F7]
[F7]
[F5]
[F6]
Name Function
Change CPU Selects the CPU for which the subse-
quent commands are to apply.
This CPU is then connected logically
with the SVP.
not assigned
Step Executes the next command if the server
is in Single Cycle Instruction Mode
ARMSS Changes the user rights of an existing
management ARMSS connection
Stop Only effective in CE mode:
Stops the selected CPU
Start Starts the selected CPU
not assigned
Mode Select – Switches to the MODE SELECTION
FRAME
– Erases WRITE-CONSOL message
on the screen (e.g. SHUTDOWN
COMPLETED)
– Erases BEL display in screen line 25
ModeChange Switches back and forth between FJ-
PROGRAM FRAME and SVP FRAME
(for Customer Support only if appropriate
settings apply!)
Cancel/Reset Cancel input, release keyboard
Refresh/Clear The last frame output is displayed again.
All inputs of the current frame made to
date are reset.
Using SVP frames
21