SVP frames and subframes
4.4.2.2
(LD) PROGRAM LOAD FRAME: DETAIL-2
-VM MODE-
==> 2
*1 NATIVE
>*2 AVM/EX
RA
Figure 9: PROGRAM LOAD FRAME: DETAIL-2 screen
By making an entry in this frame and pressing the [ENTER] key, you set the operating
mode.
VM MODE ==>
1
2
IPL EXECUTION ==> IPL execution
1
2
If there are changes to the VM MODE and
loaded and no IPL is executed.
32
----- PROGRAM LOAD FRAME: DETAIL-2 -----
CL-0
CPU-0 CHP-0
Selection of the firmware to be loaded from SVP
NATIVE
AVM/EX
ENABLE
DISABLE
-IPL EXECUTION-
==> 1
>*1 ENABLE
*2 DISABLE
*ENTER
EXECUTE
*PF3
GO TO BASIC FRAME
*PF9
GO TO DETAIL-1
RUN
for BS2000 operation
for VM2000
executes IPL
does not execute IPL
IPL EXECUTION => 2
Operating the service processor
E90L01G
[]-[]00
, only the other firmware is
U41859-J-Z126-2-76