Svp Frames And Subframes; Ml) Mode Selection Frame - Fujitsu BS2000 SE Series Operating Manual

SVP frames and subframes

4.4 SVP frames and subframes
The frames are used by the operator for sending jobs to the SVP and for receiving replies
from the SVP.
Some frames have up to seven subframes. The subframes contain other, more detailed
functions and information which does not fit in the main frame.
Several frames display settings stored by the SVP. The current setting is indicated by an
">" arrow before the corresponding menu item. An example of this is provided in
STOP/START MODE applies only for the target CPU (selected CPU).
i

4.4.1 (ML) MODE SELECTION FRAME

FUNCTION=>
- EXECUTION -
*1 CPU STOP
*2 INTERRUPT
*3 TOD ENABLE
*4 SYSTEM RESET
*5 SYSTEM RESET CLEAR
*6 STORE STATUS
*7 RESTART
RA
Figure 6: MODE SELECTION FRAME screen
By making entries in this frame and pressing the [ENTER] key, you can switch to other
frames or execute various basic functions.
24
This manual only describes the frames required by the operator.
----- MODE SELECTION FRAME -----
CL-0
- SELECTION -
*LD PROGRAM LOAD
*ST STATUS DISPLAY
*MA MANUAL OPERATION
*AD ALTER/DISPLAY
*ME MESSAGE
*CH CH/SUBCH STATUS
*AU AUXILIARY
*MF MSF
*PA PERFORMANCE ANALYZER
CPU-0 CHP-0 RUN
Operating the service processor
E90L01G
CPU SELECT=>
- 0 1 2 3 4 -
- -
STOP/START MODE=>
*1 ALL CPU
>2 TARGET CPU
[]-[]00
U41859-J-Z126-2-76
figure 6: