Fujitsu BS2000 SE Series Operating Manual page 57

Operating the service processor
Invoking IORSF Control Frame
Enter
Ê
i
The AUXILIARY FRAME: IORSF CONTROL screen is displayed:
Figure 27: AUXILIARY FRAME: IORSF CONTROL screen
The first four IORSF are displayed in the upper portion of the screen. You can scroll to
the next four IORSFs with the [Page down] key, and back with the [Page up] key.
In this example the IORSF with the number 0 is active.
Display:
Now you want to activate the IORSF with the number 2:
Enter
Ê
For our example enter
Ê
key.
U41859-J-Z126-2-76
in the SELECTION=> field. Press the [ENTER] key.
2
If the frame code
AU2
command is entered in line 24, the following frame is displayed immediately.
AU2
CURRENT NO. = 0
in the FUNCTION=> field. Press the [ENTER] key.
1
in the
2
is entered in the MODE SELECTION FRAME or the
NEXT POWER ON RESET NO
Examples of SVP operation
field and press the [ENTER]
FR
57