Advertisement
How to use the pellet burner
The pellet burner needs the air for combustion, therefore the boiler room must have an air-
inlet valve. The air-inlet valve must have at least the same area as the chimney and must be
opened.
The pellet burner must not be taken into operation until it is safely established that the
smoke can escape freely through the boiler and an officially approved chimney out into the
open air.
Iwabo Villa S2 is supplied with pellets by an external pellet feeder connected to a pellet
storage bin. For the best functioning and most even feeding, the pellet feeder should be
rising at angle of 45°.The pellet feeder should be able to feed some 10 kg of pellets per hour
during continuous (un-interrupted) operation / need for pellets.
The pellets must be kept in a well ventilated, moisture-free space or in specially adapted
storage bin.
NOTE:
Iwabo Villa S2 consists of high -quality components that must not be replaced by spare
parts of lesser quality. If the components are exchanged for other than original spare parts,
the warranty cannot be applied.
7
Advertisement
Chapters
