Control Mode (Preset) - GRAUPNER mc-26 Programming Manual

Control mode (preset)

33028_mc_28_Teil2_jh
Here you can select the control mode that is preset when setting up
a new model memory. This determines which control functions are
assigned to the control sticks. In the "Receiver assignment" menu,
you can see which control function is output on which channels.
Changing the control mode in an existing model memory is only pos-
sible in the "Basic setting model" menu.
The arrangement depends on the model type:
Control mode airplane models
MODE 1 (Throttle right)
Elevator Full throttle
Elevator Motor idle
MODE 3 (Throttle right)
Elevator Full throttle
Elevator
Motor idle
Control mode heli/copter models
MODE 1 (Throttle right)
Nick Motor / Pitch
Nick Motor / Pitch
MODE 3 (Throttle right)
Nick Motor / Pitch
Nick Motor / Pitch
Control mode car/boat
MODE 1 (for/backward right)
forward/backward
forward/backward
MODE 3 (for/backward right)
forward/backward
forward/backward
MODE 2 (Throttle left)
Full throttle Elevator
Motor idle Elevator
MODE 4 (Throttle left)
Full throttle Elevator
Motor idle Elevator
MODE 2 (Throttle left)
Motor / Pitch Nick
Motor / Pitch Nick
MODE 4 (Throttle left)
Motor / Pitch Nick
Motor / Pitch Nick
MODE 2 (for/backward left)
forward/backward
forward/backward
MODE 4 (for/backward left)
forward/backward
forward/backward
65 / 80