Required Receiver Settings - GRAUPNER mc-26 Programming Manual

Multichannel 1
Input1 fr –––
Input2 fr –––
Input3
fr –––
Input4 fr –––
SEL Offset
Multichannel 2
Input1 fr –––
Input2
fr –––
Input3 fr –––
Input4 fr –––
Input5
fr –––
Input6
fr –––
Input7 fr –––
Input8 fr –––
SEL Offset
Multichannel 1
Input1 +100% +100%
Input2 +100% +100%
Input3 +100% +100%
Input4
+100% +100%
– Tr v +
Before starting to use the NAUTIC modules, make the settings described above.
7 (Selection: 5 ... 8)
Light module
No. 2381
8 (Selection: 5 ... 8)
Soundswitch
No. 2382
The figure shows the connection possibilities of the modules "2-16 C
NAUTIC-Expert Switch Module", "1/4 C-NAUTIC Multi-Prop Mini Decoder",
"Light Module" and "Soundswitch". Two of these modules can be operated
in parallel through the »Multi- channel« menu.
33028_mc_28_Teil2_jh

Required receiver settings:

In the "SETTINGS & DATAVIEW" menu set "20 ms".
In the "SETTINGS & DATAVIEW" menu set "SAME".
The control channel in use should not be used either as an input or
as an output channel of a mixer.
In the "Multi- channel" menu of the transmitter set:
Activate the "SET" column of the multichannel
0%
Assign the channel in the column "SEL"
0%
0%
Select the type of the multichannel (4CH or 8CH) in the "SEL" column
0%
Assign a control or a switch in the column "=>" of the following dis-
play
In the multichannel selection display
Select a switch in the "STO" column
0%
0%
Assigning the switch in the column "
0%
0%
Set the offset value in the "Offset" column
0%
0%
0%
With the selection keys to the right beyond "Offset" appears "- Travel
0%
+", here you can limit the travel of the channel
Multichannel use example
(Receiver battery to the ports
marked with „B + -" )
Receiver
Batt. 3...30V
No. 4159
1- H -2
2 - 16 C
1- G -2
1- F -2
1- E -2
NAUTI C - Expert
1- D -2
Switch module
1- C -2
1- B -2
1- A -2
M
"
6 (Selection: 5 ... 8)
RX
Best.-Nr. 4142.N
1/4 K NAUTIC
S 4
S 3
Multi-Prop-
S 2
Mini-Decoder
S 1
other servos, governor,
winch, ... also possible
in this side
external power
supply 3 ... 30 V
+
-
- +
Other modules such as, e.g. ...
Switch module Heavy-duty SXH No. 3970
Switch module Multi function SXM No. 3971
Wiring for direct connection of two loads to one output
Three-wire cable with flat connector No. 3941.6
brown
orange red
Switch
module Switch module Heavy-duty
SXH
SXH No. 3970
Switch
module
Switch module Multi-function
SXM
SXM No. 3971
Device
Power consumption of directly connected
max. 0,7 A
devices (but not electric motors)
Device each max. 0,7 A (a total of max. 8 x 0,7 A).
max. 0,7 A
63 / 80