Receiver Configuration; Fixed-Wing Models - GRAUPNER mc-26 Programming Manual

Receiver configuration

Fixed-wing models

10 / 80
The servos must be connected to the receiver in the indicated
sequence. Not assigned outputs remain free. It is possible to change
the settings in the line "Receiver outputs" in the "Model basic set-
ting" menu.
Fixed-wing models with and without a motor with up to 4 ailerons
and up to 4 flaps and tail type "normal" or "2 elevator servos"
free or FLAP2 right or special function
free or FLAP2 left or special function
free or 2nd elevator or special function
free or AILERON2 right or special function
receiver power supply
FLAP right or free or special function
FLAP of FLAP left
AILERON right or special function
rudder
elevator or elevator1
AILERON or AILERON left
Airbrake or engine servo or electric drive controller
receiver power supply
free or AILERON2 left or special function
Tail type "V tail
free or FLAP2 right or special function
free or FLAP2 left or special function
free or special fucntion
free or AILE2 right or special function
receiver power supply
flap right or free or special function
flap or flap left
aileron right or special function
elevator/rudder right
elevator/rudder left
aileron or aileron left
airbrake or engine servo or drive controller
receiver power supply
free or AILE2 left or special function
Delta/flying wing models with and without a motor with up to 4
ailerons/elevators and 4 flap/elevator servos
free or special function or flap 2 / elev right
free or special function or flap 2 / elev left
free or special function
free or special function
receiver power supply
free or flap / elev right
fre or flap / elev left
free or special function
free or rudder
aile/elev right
aile/elev left
Airbrake or motor servo
or ESC for electric models
receiver power supply
free or special function
33028_mc_28_Teil2_jh