Stick Mode; Changing The Stick Mode - GRAUPNER mz-10c Manual

Stick Mode

Changing the stick mode

S1001.G1 and S1001.G1.77-USA-V1.0
There are four different options for assigning the stick functions: roll, nick,
yaw and throttle/pitch. Modes are chosen depending on pilot preferences.
Changing the mode step by step
1. Activate the transmitter programming mode.
2. Switch on the transmitter.
3. Press the left MODE button on the front side of the transmitter to
advance to the right programming option.
4. Pay attention to the number of the beeps.
Buzzer Central status LED
3x beeps Solid on
4x beeps Solid on
5x beeps Solid on
6x beeps Solid on
5. Press and hold the MODE button for approx. 3 seconds. The new
settings are automatically stored in the transmitter. After the
button is released a confirmation melody will sound and the
beeping will stop.
6. Switch off the transmitter and remove the programming
connector.
Note
Never use the transmitter to control the model while the programming
connector is plugged in!
Description
>>MODE 1<<
>>MODE 2<<
>>MODE 3<<
>>MODE 4<<
23 / 33