GRAUPNER mc-26 Programming Manual page 52

AIL -> RUD (aileron -> rudder)
Wing mixers
Multi-flap menu
Brake settings
AI RU 0%
FL EL 0% 0%
Nor mal
FLAP -> ELE (flaps -> elevator)
Wing mixers
Multi-flap menu
Brake settings
AI RU 0%
FL EL 0% 0%
Nor mal
52 / 80
In this mixer, the aileron is entrained by the aileron control. In con-
junction with the differentiation of the ailerons the negative torque
is compensated. This allows a "clean" curve flight. The rudder
remains separately controllable.
–––
–––
The adjustment is only symmetrical to the neutral point of the aile-
ron control stick. The setting range of ±150 % makes it possible to
appropriately adapt the deflection completely independently from
the direction of the rudder servos. If the model is to be controlled
through the ailerons only, then this mixer can be activated through
a switch or control switch. Therefore assign a switch in the right col-
umn.
This mixer causes an elevator correction when the flaps are actu-
ated. If the flaps are set, the flight speed can be influenced or the
flap torques can be compensated.
The position of the elevator is automatically adjusted through this
–––
–––
mixer as a function of the set value when the flaps are set. The set-
ting can be symmetrical or asymmetrical to the neutral point of the
flap control.
This mixer can be optionally activated through a switch or control
switch. Therefore assign a switch in the right column.
33028_mc_28_Teil2_jh