Symbols Explication; Menus Description; Meaning Of The Warnings - GRAUPNER mc-26 Programming Manual

Symbols explication

Menus description

Meaning of the warnings

Batter y
needs
charging !!
BIND?
OK
Warning!
Switch OFF the receiver
first!
CAN'T
RECEIVE
DATA
OK
Please select
RF on/off?
ON OFF
Switch
RF module
OFF
OK
33028_mc_28_Teil2_jh
Always observe the information indicated by this warning sign. Par-
!
ticularly those which are additionally marked with the
WARNING
or
tial for serious injury, the signal word
ity of lighter injuries.
The signal word
Attention
indicates potential damages to objects.
The menus are described in the same sequence as they appear in
the lower display. Tap on the SET button in the base display to switch
in the multifunction menu.
The chapters of the manual are marked with model type symbols.
The symbols are exactly the same used in the transmitter. It shows
you which paragraph is related to your model type. Thus makes it
easier to find which paragraph is required for each model program-
ming.
Transmitter input voltage too low
"Bind?"
No receiver is bound to the actually active model memory. By
shortly tapping the SET button you can accede the related option.
You want to perform a model change in the "
but the receiver of the actually active model is however still
switched on.
No bound receiver in range.
Should the RF transmission be switched "ON" or "OFF"?
It appears only after switching the transmitter on with already
bound receiver in active model memory.
Request to switch the RF transmission off
WARNING
. The signal word
CAUTION
Note
indicates potential malfunctions.
CAUTION
indicates the poten-
indicates possibil-
Model select"
menu
13 / 80