Huawei UPS5000-E Series User Manual page 168

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Item
Bypass Settings
Figure 4-25 Bypass settings
Item
Maximum
bypass voltage
Minimum
bypass voltage
Bypass
frequency
Issue 11 (2019-12-20)
Description
faulty, an interruption (less than
20 ms) occurs when the UPS
transfers from normal mode to
bypass mode. If Output freq.
track rate (Hz/s) is fast, the
inverter frequency is unstable.
Description
When the difference between the
bypass voltage and the rated
voltage exceeds the upper
threshold for the bypass voltage,
the system determines that the
bypass voltage is not normal and
that the bypass is unavailable.
When the difference between the
bypass voltage and the rated
voltage exceeds the upper
threshold for the bypass voltage,
the system determines that the
bypass voltage is not normal and
that the bypass is unavailable.
When the difference between the
bypass input frequency and the
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value Value Range
Default Value Value Range
 When the voltage level is 380 V,
the value range is +10%, +15%,
+20%, and +25%. The default
value is +15%.

When the voltage level is 400 V,
the value range is +10%, +15%,
and +20%. The default value is
+15%.
 When the voltage level is 415 V,
the value range is +10% and
+15%. The default value is
+10%.
–10%, –15%,
–20%
–20%, –30%,
–40%, –50%,
–60%
± 2 Hz ± 0.5 Hz to ± 6
158