Huawei UPS5000-E Series User Manual page 160

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Item
Stop bit
Figure 4-15 Modbus TCP settings
Item
ModbusTCP
encryption
Issue 11 (2019-12-20)
Description
communication, ensure that the
parity modes for the device nodes
are set to the same mode.
Stop bit in the Modbus
communication frame format.
When the UPS is connected over
the serial port Modbus, set this
parameter based on the frame
format that the upstream device
Modbus supports.
Description
If Modbus TCP is used for
communication, communication
links do not implement
encryption or implement
encryption based on the selected
encryption mode.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value Value Range
1 1–2
Default Value Value Range
Enable Disable, Enable
150