Huawei UPS5000-E Series User Manual page 217

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Figure 4-65 Buttons after one event is expanded
Table 4-25 Buttons after one event is expanded
No.
1
2
3
Adding one job for one event: Select one event (for example, Inverter on), click the button
for adding one job, and the page for adding a job for the event is displayed.
When adding a job, the job types to be selected are: RCCMD Shutdown, RCCMD Message,
RCCMD Execute, and RCCMD TRAP. RCCMD Shutdown is selected by default. For
different job types, you need to enter different contents.

Issue 11 (2019-12-20)
Name
Button for modifying
Button for deleting one job
Button for test
RCCMD Shutdown: You need to specify the RCCMD client IP address and port. When
the RCCMD client receives the job, it will shut down the computer.
Copyright © Huawei Technologies Co., Ltd.
Description
A dialog box for modifying a job is
displayed after you click this button. You
can modify the job.
You can delete the job by clicking this
button.
If you click this button, the job will be
performed and a message showing test
succeeds or fails will be displayed on the
page.
4 User Interface
207