Huawei UPS5000-E Series User Manual page 159

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Item
IP address
Subnet mask
Gateway
MAC address
NAT mapping
Figure 4-14 RS485 settings
Item
Address
Baud rate
Parity mode
Issue 11 (2019-12-20)
Description
Specifies the IP address for the
Ethernet.
NOTICE
Ensure that the UPS IP address is
unique on the network segment.
Otherwise, the WebUI display
function may not function properly.
Specifies the subnet mask of the
Ethernet.
Specifies the Ethernet gateway.
Defines the physical address of
network equipment and is not
configurable.
NAT means network address
translation. If it is set to Disable,
Internet cannot access IP
t
addresses in he local area
network (LAN).
Description
This serial port address is
allocated by the user.
Select a baud rate to match the
user's network management
conditions onsite.
Verify the validity of RS485
communication characters. When
a device node adopts RS485
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value Value Range
192.168.0.10 1.0.0.0–223.255.
255.255
0.0.0.0–255.255.
255.255.255.0
255.255
192.168.0.1 1.0.0.0–223.255.
255.255
- -
Disable Disable, Enable
Default Value Value Range
1 1–254
9600 9600, 19200,
115200
None None, Odd,
Even
149