Huawei UPS5000-E Series User Manual page 197

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Item
Select the network security
certificate key to be uploaded
Export certificate file: Export the root certificate.
Time
Set the time zone and time for the site.
Comm. Settings
Set IP Settings, RS485 Settings, ModbusTCP Settings, Amb. T/H Sensor, Batt. Temp.
Sensor, BMU, and WIFI Settings.
ModbusTCP
Table 4-20 Access ModbusTCP security certificate
Item
Upload CA certificate file
Upload local certificate file
Upload key file
Key password
Confirm key password
Set twice challenge prelim share code: Set the user authentication password between the
NetEco and the UPS.
Alarm Parameters
Enable or disable alarm information for components in the system.
iBOX Settings
Set iBOX parameters.
SNMP

Issue 11 (2019-12-20)
The default SNMP version is SNMPv3, and the preset MD5/SHA password is
Changeme1, and the preset DES/AES password is Changeme2. Change the password
after your first login, preventing unauthorized access.
Copyright © Huawei Technologies Co., Ltd.
Description
Upload the key of the network security certificate.
Description
Import a CA certificate for the UPS to verify the
certificate of the Modbus-TCP communication access
party.
Users can replace the UPS certificate with a trusted
certificate.
Key file of the certificate.
Decryption password of the key.
Confirm the decryption password of the key.
4 User Interface
187