AJAX Hub User Manual page 96

3. Close to metal objects and mirrors that cause radio signal attenuation or shading it.
4. Outside the premises (outdoors).
5. In rooms with a temperature and humidity exceeding the appropriate levels.
6. Closer than 1 m from the hub.
Check the signal level at the installation location
During testing, the signal level can be seen in the application and on the keypad panel – blue LEDs
(Disarmed mode) and (с) (Night mode), as well as red X (Fault), are used.
mode),
If the signal level is one division, we cannot guarantee stable operation of the security system. Take possible
measures to improve the quality of the signal! As a minimum, move the device – even 20 cm shift can significantly
improve the quality of reception.
If, after moving, the device still has a low or unstable signal strength, use a radio signal range extender ReX.
The touch-sensitive panel of the keypad is designed for operation with the device mounted on the surface. If you use
Keypad in your hands, we cannot guarantee successful operation of the touch-sensitive buttons.
States
(Armed