AJAX Hub User Manual page 167

1. Following the hub instruction recommendations, install the
add the hub to the application, and create at least one room.
2. Go to the Ajax application.
3. Switch on the hub and check the internet connection (via Ethernet cable and/or GSM network).
4. Ensure that the hub is disarmed and does not start updates by checking its status in the mobile application.
5. Connect Socket to the power supply and wait for 30 seconds.
Only users with administrative rights can add the device to the hub.
How to connect Socket to the hub:
1. Select the Add Device option in the Ajax application.
on your smartphone. Create an account,
Ajax application