AJAX Hub User Manual page 77

Setting
First field
Room
Delay When Entering, sec
Delay When Leaving, sec
Delays in night mode
Arm in Night Mode
Primary Detector
External Сontact Enabled
Always active
Activate the siren if the door or window is open
Activate the siren if an external contact opened
Jeweller Signal Strength Test
Detection Zone Test
Attenuation Test
User Guide
Value
The detector name, can be edited
Selecting the virtual room to which the device is assigned
Setting the delay time when entering
Setting the delay time on exit
Delay turned on when using night mode
If active, the detector will switch to the armed mode when using
the night mode
If active, DoorProtect primarily reacts to opening/closing
If active, the detector registers external detector alarms
If active, the detector always registers opening/closing
HomeSiren StreetSiren
If active, and
opening detected
If active, HomeSiren and StreetSiren are activated during an
external detector alarm
Switches the detector to the signal strength test mode
Switches the detector to the detection area test
Switches the detector to the signal attenuation test mode
(available for detectors with firmware version 3.50 and later)
Opens the detector User Guide
are activated when the