AJAX Hub User Manual page 67

After actuation, DoorProtect immediately transmits the alarm signal to the hub, activating the sirensand notifying the
user and security company.
Pairinging the Detector
Before starting pairing:
1. Following the hub instruction recommendations, install the
hub to the app, and create at least one room.
2. Go to the Ajax app.
3. Switch on the hub and check the internet connection (via Ethernet cable and/or GSM network).
4. Make sure that the hub is disarmed and does not update by checking its status in the app.
Only users with administor rights can add the device to the hub.
How to pair the detector with the hub:
on your smartphone. Create an account, add the
Ajax app