AJAX Hub User Manual page 95

3. When the hub starts searching for a device and launches countdown, switch on the KeyPad by pressing the on/off
button for 3 seconds – it will blink once with an LED.
For the detection and interfacing to occur, the detector should be located within the coverage area of the wireless
network of the hub (at a single protected object).
Request for connection to the hub is transmitted for a short time at the time of switching on the device. If the
connection to the hub failed keypad will switch off after 5 seconds. Repeat the connection attempt.
The keypad will appear in the list of devices of the hub. After adding the keypad to the system, it will have the
following default codes: 123456 and Duress Code: 123457
Selection of the Keypad Location
While selecting the Keypad location, take account of the keypad distance from the hub and presence of any
obstacles between the devices, hindering radio signal transmission: walls, inserted floors, large-size objects located
within the room.
Do not install the KeyPad:
1. Near radio transmission equipment, including that operated in 2G/3G/4G mobile networks, Wi-Fi routers,
transceivers, radio stations, as well as an Ajax hub (it uses a GSM network).
2. In close proximity to electrical wiring.