AJAX Hub User Manual page 82

1. Fix the SmartBracket attachment panels and the magnet using the bundled screws. If using any other attachment
hardware, make sure that they do not damage or deform the panel.
Double-sided adhesive tape may be only used for temporary attachment. The tape will run dry in the course of time, which may result in falling of
DoorProtect and actuation of the security system. Furthermore, the device may fail from a hit.
2. Put the detector on the attachment panel. As soon as the detector is fixed in SmartBracket, it will blink with a
LEDsignaling that the tamper is closed.
If the light indicator do not blink after installing in SmartBracket, check the status of the tamper in the Ajax app and then the fixing tightness of the
panel.
If the detector is torn off from the surface or removed from the attachment panel, you will receive a notification.
3. Put the magnet on the attachment panel.
Do not install the detector:
1. outside the premises (outdoors);
2. nearby any metal objects or mirrors causing attenuation or interference of the signal;
3. inside any premises with the temperature and humidity beyond the permissible limits;
4. closer than 1 m to the hub.