External Led Connection - AJAX Hub User Manual

In case of any attempt to dismount the siren, you will receive the notification.
Do not install the siren:
1. outside the premises (outdoors)
2. in places where the acoustic signal will be attenuated (inside furniture, behind thick curtains, etc.)
3. nearby any metal objects or mirrors causing attenuation and screening of the signal
4. within any premises with the temperature and humidity beyond the range of permissible limits
5. closer than 1 m from the hub.

External LED connection

The outside-mounted LED connected to the HomeSiren is paralleled with the built-in LED of the device and
completely repeats its indication.
For connection, use the contact on the rear side of the siren body and observe the polarity during the connection.
Black terminal wire — "+" contact.
Outlet power supply: 3 V, 10 mA.