Maintenance And Battery Replacement - AJAX Hub User Manual

Maintenance and Battery Replacement

The device does not require maintenance when mounted in the housing of a wired sensor.
Battery Replacement
Tech Specs
Connecting a detector
Mode for processing alarm signals from the detector
Power
Capability to power the connected detector
Protection from dismounting
Frequency band
Compatibility
Maximum RF output power
Modulation
ALARM and TAMPER (NO/NC) terminals
Pulse or Bistable
3 x CR123A, 3V batteries
Yes, 3.3V
Accelerometer
868.0–868.6 MHz or 868.7 – 869.2 MHz, depends on sales
region
Hub Hub Plus
Operates only with ,
Up to 20 mW
GFSK
Hub 2 ReX
, and